Looking for a specialized package? Crimtech can work with you to custom design and build exactly what you need.

Crimtech Custom Package Samples:

Inlet Separator Package	Description
	This package allows for 2-phase separation of gas and liquids in an enclosed building. Features include internally coated vessel, automated emergency shutdown system and full electrical package. Responsibilities included process and mechanical design, vessel, piping and structural construction and installation of instrument controls.
Side View Enclosed	Client: BDR Engineering c/o Trident Exploration Corp.

Side View Not Enclosed	End View	Interior View	Interior View
			*click image to enlarge

Flare Knock-out Package	Description
	This above-ground double walled package is heated and insulated for cold weather operations and internally coated for sour service. Features include vacuum monitored interstitial space, drip tray with siphon for truck out connection and winch truck ready for easy transport. Responsibilities included process and mechanical design, vessel, piping and structural construction and installation of instrument controls.
Front View	Client: Swatech Industries
Front View	Back View
	*click image to enlarge

Automated Wet Gas Metering Satellite	Description
	A fully automated wet gas metering package, up to four measurement runs, with fuel gas system, methanol and chemical injection system, 85 bbl methanol storage tank, SCADA and PLC control system. Features include: Shur-Flo's Roto-Boss dual chamber orifice changer, expansion capabilities for future measurement runs, 85 bbl and 420 gallon PlasTank dual wall tank systems for methanol and chemical storage. Responsibilities included process, mechanical and electrical engineering. Project also included vessel, skid and piping fabrication, building, instrument and electrical construction.
Interior View	Client: Husky Energy Inc. / Tartan Engineering Ltd.

Exterior Rear View	Exterior View	Interior View	Interior View	Electrical Panel	Interior View

*click image to enlarge

High Pressure Wet Metering Skid	Description
	Fully automated wet metering package. Units constructed with either 1500 ANSI or 2500 ANSI inlet ESD systems, full remote control capabilities by SCADA, methanol and chemical injection systems. Features include: environmentally friendly "low bleed" controllers, automatic fuel scrubber drain system and a light weight high strength skid design for easy transport. Responsibilities included mechanical engineering and design, piping and skid fabrication, building construction, instrument and electrical construction.
Exterior View	Client: Devon Canada Corporation
Interior View	Interior View
	*click image to enlarge

Baltimore Air Cooler	Description
	2.5 MM Btu/hr Air Coil Unit, sized for propane condensing duty, complete with 6 ft by 8 ft water treatment module, with internal tanks and chemical injection control.  Features include: compact cooling and condensing unit with the Baltimore cooler and separate water treatment package. Water treatment package has room to expand for future chemical needs. Responsibilities included water treatment module, all installation engineering such as civil, electrical and mechanical. Project also included the procurement and construction coordination of the cooler unit. All components were integrated into the existing system.
Exterior View	Client: Encana Oil & Gas Corporation

Site View

*click image to enlarge

Group and Test Production Header	Description
	Fully automated 10 well oil production test header separator.  Package is able to be fully controlled remotely by SCADA system. Features include a unique design that uses Crimtech's patented oil FloDrip separator ("L" Design). This package also utilized the Flo-Point Water-cut sensor. Responsibilities included process, mechanical and electrical engineering. Project also included vessel, skid, piping fabrication, building contruction, PLC programming, instrument and electrical construction.
Interior View	Client: NAL Oil & Gas Ltd.
	Interior View
	*click image to enlarge

Recycle Oil Heater Building	Description
	9 ft x 20 ft recycle pump / heat transfer skid. 150 psig design pressure included: transfer pump, 500,000 Btu / hr shell and tube heater exchanger, heat medium pumps and controls. Features include "plug and play" system which required only the process lines. The power and controls were connected. The flexible header system enabled one single pump to act as a backup for all other pumps. Responsibilities included process, mechanical and electrical engineering. Project also included design drafting, project coordination, procurement, insulating, electrical and instrumentation construction.
View without Building	Client: Encana Oil & Gas Corporation
	Exterior Building View
	*click image to enlarge

High & Low Pressure Flare Knock-Out Drum	Description
	8.0 ft I.D. by 30 ft s/s, 50 psig design pressure, dual chamber vessel for 90 MMSCFD. Internal 3.25 Inch thick head, removable internals, internally coated. 24 inch inlet nozzles with dual 18 inch outlet nozzles. Features include unique process design that splits the flow on the high pressure side. This increased the capacity of the vessel while keeping the overall size to a minimum. All internals are removable for quick coating repairs in the future. Responsibilities included process and mechanical engineering, design drafting, vessel fabrication, insulating and internal coating.
View of Vessel In Progress	Client: VECO Engineering c/o Conoco Canada Resources Ltd.
	Exterior View of Vessel
	*click image to enlarge

Literature:

Crimtech has a variety of written information available on everything from wellhead separators to oil measurement systems.  Visit our Literature Request Page to learn more.